Coaxicom 7/16 DIN RF Connectors are intended as replacements for N connectors in high power, low intermodulation applications, particularly communications systems. Larger and more rugged than N connectors, they employ M29 x 1.5 metric screw type couplings and have a peak voltage rating of 2,700 VRMS. They will operate up to 7.5 GHz, have a nominal characteristic impedance of 50 Ohm and are weatherproof. Inner and outer conductors are silver plated to minimize intermodulation distortion. Our 7/16 DIN connectors also feature phosphor bronze female contacts for lower contact resistance and better repeatability.
The 014038-XX-4 and the 014039-XX-4 are unique connectors that can be assembled as a straight or right-angle plug, reducing inventory and simplifying logistics. This is not accomplished by a backlit that screws into the connector body from either side or the back.
Not all 7/16 connectors are available for all cable gross. This is because the series is specifically designed for very low and repeatable intermodulation distortion, which is largely dependent on the mechanical integrity of the fit between the connector components and the cable. This also leads to individual cases where a connector will fit most, but not all of the cables within a cable group. Consult factory for specific applications.
7/16 DIN MECHANICAL SPECS:
Interface dimensions: Per IEC 169-4
Center Contacts: Silver per QQ-S-365 or Albaloy. Other metal parts: Silver per QQ-S-365 or Albaloy.
COAXIAL CABLE GROUPS:
LMR400, LMR400 UF, Belden 9913, Belden 7810A, Belden 8214, LMR500, LMR600, LMR600 UF, RG55A, RG142, RG142A, RG223, RG400, SB400, LMR200, Belden 7807A, Commscope BWC-200, RG58, RG58A, RG58C, RG141, RG141A, RG-8X, LMR240, Belden 9258, RG402 ultra-flex, RG405 ultra-flex, RG11, RG11A, M17/6-RG11, RG8, RG9, RG87, RG213, RG225, RG393 and .250 semi-rigid or ultra-flex .
NOTE: 7/16 DIN Connector Specifications are available on Page 65 of the Coaxial Components Corp Catalog (Full PDF below).